USED XCMG 100 -ton car crane XCT100 model

USED XCMG 100 -ton car crane XCT100 model

Six Bridge, Sanqiao turning, Sanqiao driver, get on the vehicle of Volvoo II engine in Sweden, get off the car in the United States Conominso III EFI engine, German ZF box, all cover the tablet, five U -shaped main arm 49 meters, two quarters of the second quarter, two quarters The auxiliary arm is 18.1 meters.

XCMG XCT90 car crane to inherit the design of XCMG's head -style family style. It is its essence. For the design of the four bridges, the entire vehicle is 14m in length, with the most advanced lifting arm system, and the six new single -cylinder insertion and the primary arm (58m).

In addition, there are 18.3M fixed auxiliary arm, 7m extended section, 2.9m independent arm head, optimized U -shaped section, high -strength steel plate, and its lifting performance of the boom is always a leading position in the industry.

XCMG XCT90 car crane maximum rated total weight: 90T, maximum lifting torque: 3528kn • m, basic arm: 12.4m, maximum main arm: 58m, longest main arm+side arm: 78.3m

The main arm of XCMG XCT100 car crane is 64m, and the lifting performance is over 10-15%of the current highest level in China. The arm length and lifting performance covered the same tonnage products at home and abroad. The optional 2.9M independent arm head, two sections of 7m main arm extended sections, which further improves the operating capacity.

The 100 -ton performance table of XCMG crane is as follows:

Rated power: 306kW

Rated power speed: 1900rpm

Model: XCT100

The size of the whole machine: length × width × height: 15.00 × 3.00 × 3.50 meters

Wheelbase: 1420/420/800/420/505mm

Work weight: 58 tons

Minimum turn radius: 12 meters

Maximum climbing: 40%

Near angle/departure angle: 20/14 degrees

Minimum ground clearance: 310mm

Rate weight: 100 tons

Retate the gravity torque: 3450kn.m

Minimum work range: 3 meters

Lifting arm length-basic arm: 13.5 meters

Stupid arm full extension time: 160 seconds

Strip spacing: Vertical × horizontal: 7.56 × 7.6 meters

      In addition, its lifting arm is fully intelligent control, and the lifting movement also achieves stepless speed adjustment, especially for high -precision installation operations. It is also equipped with a leg pressure detection system to detect the stress of the vehicle's legs in real time.

QY110K (Xuzhou Michigan) XZJ5555JQZ110K 5.56 million six bridges, four bridges turn, three bridges drive, 162 kW on the car, German Mercedes -Benz Edar engine, get off 360 kWh, Mercedes -Benz European Edar, Emperor's ZF box, all covered with all coverage. Pine board, XCM Gong Mei Chi Bridge, 58 meters of U -shaped main arm in six sections, single -cylinder plug -in and retractable system, 2nd section of the secondary arm 18.1 meters, Hesman power limiter, cold on and off the car ...

    XCMG crane is a crane, including car cranes and all -ground cranes, which can quickly transfer and drive long -distance driving. It can meet the requirements of operations on narrow and rugged or muddy fields, that is, fast driving speed, multi -bridge driver, full -wheel wheels, all -round rounds Steering, three steering methods, high ground clearance, high climbing ability, no legs and heavy functions, etc. The range of weight is large. It can be from 8 tons to 1200 tons. 10. It is the largest output and the most widely used crane type. At present, Xugong Group Xuzhou Heavy Machinery Co., Ltd. has independently developed a full series of large tonnage cranes in the entire series of domesticization. The investment and large -scale production of this product breaks the monopoly of foreign giants in high -end heavy -end product technology.